1、中國腐蝕與防護學會科技進步一等獎，2022年

2、湖南省研究生教學成果三等獎，2022年

2、主要科研項目

1、國家重點研發子課題(2022YFB3404904)，主持。

2、非基面織構和析出相形態協同作用下車用非稀土鎂合金強塑性機理研究（52105140），國家自然科學基金青年基金，主持。

3、稀土鎂合金非基面織構的調控及強韌化機理研究（2021JJ40583），湖南省自然科學基金青年基金，主持。

3、主要成果評價

低成本抗蠕變變形鎂合金開發制備關鍵技術及應用科學技術成果評價(202243YX0042)

4、主要論文

[1] Huang W, Chen J, Zhang R, Effect of deformation modes on continuous dynamic recrystallization of extruded AZ31 Mg alloy, Journal of alloys and compounds, 897 (2022): 163086.

[2] Huang W, Huang H, Li W, Influence of heat treatment and pre-straining on dynamic precipitation and creep behavior of AZ91-0.5 Y magnesium alloys, Materials Science and Engineering: A, 841 (2022): 143049.

[3] Huang W, Chen J, Jiang Z, Influence of Ca Content on Microstructure and Mechanical Properties of Extruded Mg–Al–Ca–Mn Alloys, Acta Metallurgica Sinica (English Letters), (2022): 1-13.

[4] Huang W, Li Y, Yanjie R E N, Effect of scanning speed on the high-temperature oxidation resistance and mechanical properties of Inconel 625 alloys fabricated by selective laser melting, Vacuum, 206 (2022): 111447.

[5] Huang W, Chen J, Zhang R, Effect of deformation modes on continuous dynamic recrystallization of extruded AZ31 Mg alloy, Journal of Alloys and Compounds, 897 (2022): 163086.

[6] Li W, Chen H, Huang W*, Optimization of multiple laser shock peening on high-cycle fatigue performance of aluminized AISI 321 stainless steel, International Journal of Fatigue, 153 (2021): 106505.

[7] Li W, Chen H, Huang W*, Effect of laser shock peening on high cycle fatigue properties of aluminized AISI 321 stainless steel, International Journal of Fatigue, 147 (2021): 106180.

[8] Huang W, Huo Q, Xiao Z, Identification and analysis of anomalous {10-12} twins in an extruded Mg-2wt% Y alloy sheet during uniaxial tensile loading, Materials Science and Engineering: A, 792 (2020): 139699.

[9] Huang W, Yang X, Yang Y, Effect of yttrium addition on the hot deformation behaviors and microstructure development of magnesium alloy, Journal of Alloys and Compounds, 786 (2019): 118-125.

[10] Huang W, Huo Q, Fang Z, Damage analysis of hot-rolled AZ31 Mg alloy sheet during uniaxial tensile testing under different loading directions, Materials Science and Engineering: A, 710 (2018): 289-299.

5、主要發明專利

1、一種預變形鎂合金及其加工方法（發明專利ZL202011620212.1），排名第一

2、通過軋制和預壓縮提高鎂合金高溫蠕變性能的加工方法（發明專利ZL202011616876.0），排名第一

3、種提高高溫蠕變性能的鎂合金加工方法（發明專利ZL202011616562.0），排名第一

4、通過擠壓和錘擊提高鎂合金高溫蠕變性能的加工方法（發明專利ZL202011616811.6），排名第一

5、通過軋制和錘擊提高鎂合金高溫蠕變性能的加工方法 （發明專利ZL202011616960.2），排名第一